Milkit Tubeless Sealant (1000ml)

0 Reviews
Item Code: DS6

Rs.3,450

List Price Rs.3,450

 

NEVER WORRY ABOUT YOUR SEALANT ANY MORE.

Microfibers and Synthetic Latex make an Award Winning Product
milKit sealant coats the tire more evenly for effective sealing of punctures and long lasting results. The biggest advantage of the milKit sealant is that it always remains homogeneous.

Features:

  • No need to shake before use
  • Seals tears and holes up to 6mm
  • Stays in solution: You will always get the right mix of liquid and particles into the tyre Doesn’t separate
  • Leaves no rubbery leftovers in the tyre which leads to a prolonged functionality
  • Remains good in the bottle for 5+ years – even if the bottle has already been opened
  • Synthetic latex means no ammonia or chemically aggressive ingredients, so no horrible smell or damage to rims and tires
  • Non-allergenic, non-hazardous & washable
  • Works from -20 to +50° C / -4 – 122° F
  • CO2 compatible
  • Works well at high pressure so is suitable for gravel and road tires and well as MTB

 

milKit sealant’s microfibers give it a strong puncture sealing capability, with results for tears of up to 6mm. It covers the inside of the tire evenly, and adheres better to the tire wall than thin latex products, so the all-important microfibers are distributed optimally and ready to act as soon as you puncture.

milKit sealant is thicker than others and always stays a consistent homogenous liquid. There is no need to shake it before use.

milKit’s more environmentally friendly synthetic latex means there is no ammonia or chemically aggressive ingredients in this product. As well as being kinder on the environment this means no horrible smell or damage to rims and tires. It is also non allergenic, non-hazardous, can be diluted with water if desired and it is washable.

The sealing effect of the microfibers also works very well at high pressure, making the sealant ideal for use in road and gravel tubeless tires.

Germany’s Mountainbike magazine recognized milKit’s impeccable sealing and ease of use by voting it the best tubeless sealant in December 2020.

What amount of sealant do I have to fill into my tire?

Many factors can influence your decision about how much sealant to add into a tubeless tire. Some tires “soak up” a lot of sealant and a few days after installation a significant part of the sealant is gone. This is where the milKit valve and syringe system comes in handy: we recommend always checking the amount of sealant left in the tire a few day after installation.

Choosing the right amount of sealant also depends on the priorities of the user: adding more sealant will result in a better puncture protection but make the tire heavier. With the milKit valve and syringe system, that makes the measuring and refilling of the sealant quick and easy, the right amount of sealant can be tested and optimized step by step without a hassle.

We recommend starting with the following amounts and then optimize the right sealant level from there:

  • Road / gravel 40-80 ml / 1.4-2.7 oz
  • 26” MTB 60-80 ml / 2-2.7 oz
  • 27.5” MTB 80-100 ml / 2.7-3.4 oz
  • 29” MTB 100-120 ml / 3.4-4 oz

 

milKit tubeless sealant is designed for best results with the patented milKit tubeless valves and award winning booster for inflating tubeless tires. However, it can be used with any tubeless valves.

Using the milKit syringe you can easily measure how much sealant is left in your tire and add quickly and cleanly as needed.

How to use milKit Sealant:

  • Screw out the milKit valve core – the rubber flaps ensure no air is lost
  • Ensure tire pressure is not above 22 psi
  • Extract old sealant from tire with the milKit syringe to measure sealant remaining amount and check quality
  • Measure out the correct amount of milKit sealant and inject using the syringe
  • Screw the valve core back in, inflate tire to full riding pressure and you’re ready to ride!

 

milKit – Tubeless made easy

The milKit system was devised in Switzerland after a mountain bike ride in Moab, USA was cut short due to a flat tire and dried-out sealant. A simple puncture that would easily have sealed, had the sealant still been effective. This is a problem that anyone used to riding tubeless will understand.

The founder, product development engineer and mountain biker Pius Kobler decided to solve this problem and invented milKit.

milKit's revolutionary tubeless valve system makes the installation and maintenance of Tubeless tires quick and easy. The Swiss company's clever solution makes it possible to measure and refill the sealant without releasing the tire's air. milKit's second development, the booster, allows the installation of a Tubeless tire without a compressor and so everywhere you ride. milKit Booster won the Eurobike Award in September 2019. In 2020 milKit was crowned the Test Winner in sealants by Mountain Bike Magazine.

milKit products make your tubeless life easier.

World of Wheelz (WOW) is the exclusive distributor of milKit tubeless products in India.

Sizing Information

  • Size - 1000ml
  • Country of Origin - Germany

Ratings & Reviews